Aquafilter 10 inch polyphosphate water softener
Aquafilter 10 inch polyphosphate water softener against limescale and corrosion. 1/2″, 6 bar, cold water only.
Aquafilter 10 inch polyphosphate water softener – protection against limescale
The Aquafilter 10 inch polyphosphate water softener is a 10″ filter with a replaceable polyphosphate cartridge that protects household and heating systems from limescale and corrosion. According to the seller, polyphosphate crystals dissolve slowly in the water, reduce calcium and magnesium deposits on heaters and pipe walls and form a protective film on surfaces by dosing in minimal amounts. It is intended for washing machines, dishwashers, flow-through heaters, boilers and fittings. It needs no electricity. It is for cold water only and is not suitable for treating drinking water or food-preparation water.
- Polyphosphate crystals against limescale and corrosion.
- 10″ housing, connection 1/2″ internal thread.
- Max. pressure 6 bar, water up to 45 °C.
- Cold water only; not for drinking water.
- Price: €49.90 incl. VAT, in stock.
How it works: Aquafilter 10 inch polyphosphate water softener
The Aquafilter 10 inch polyphosphate water softener doses polyphosphates into the water in minimal amounts as the crystals dissolve. The seller states this reduces limescale on heating surfaces and pipes and brings lower energy use and fewer pipe blockages; the page gives no measurements. General information (not from the page): polyphosphate usually does not remove water hardness but limits the build-up of limescale, so "softener" in the product name is a trade term rather than true softening. Note that the page recommends cold water only and a maximum of 45 °C, even though it also mentions protecting heaters; fit the filter on the cold-water line before the appliance.
What is in the package: Aquafilter 10 inch polyphosphate water softener
The description refers to a polyphosphate cartridge as part of the product, but the page does not explicitly confirm that both housing and cartridge are supplied, so please check with us before ordering. The replacement cartridge, ANTI-SCALE FCPRA-10, is listed on its own page; no price is shown on this page. A 10″ cartridge for removing limescale, sand and mud is also available.
Technical data: Aquafilter 10 inch polyphosphate water softener
| Size | 10″ standard |
| Connection | 1/2″ internal thread |
| Cartridge | polyphosphate crystals, replaceable |
| Max. pressure | 6 bar |
| Water temperature | up to 45 °C |
| Housing material | reinforced plastic |
| Water | cold; not for drinking or food-preparation water |
| Dimensions / weight | only the 10″ length is stated |
Installation: Aquafilter 10 inch polyphosphate water softener
The seller recommends installing the Aquafilter 10 inch polyphosphate water softener on the cold-water line before the appliances, with easy access to the cartridge. For other limescale solutions, see the FOSE100 for washing machines or the FOSE200 for boilers. If you also have sediment or iron in your water, see the 5 micron sediment cartridge or the iron-removal cartridge. Call us at +386 41 567 794 for advice.
Price and delivery: €49.90 incl. VAT (€40.90 excl. VAT). The product is in stock. The page gives no delivery terms, warranty or certificates; ask us. Viewing and pickup in Murska Sobota by prior arrangement (one day ahead).
Replacement: Aquafilter 10 inch polyphosphate water softener
Replace the crystals when the amount noticeably decreases, or after about six months. The page says no special maintenance is needed beyond cartridge replacement. The replacement ANTI-SCALE FCPRA-10 has no price on this page.
