AD-11 pH meter

AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter
AD-11 pH meter

AD-11 pH meter (ADWA) is a pocket digital pH tester for water and liquids. Range −2 to 16 pH, ±0.1 pH, automatic calibration.

Zaliha
Na zalogi
Stopa poreza
22 %
Proizvodi u akciji
49,90 €
Dodaj u košaricu

 

AD-11 pH meter

ADWA AD-11: a digital pocket pH tester with automatic temperature compensation

The AD-11 pH meter is a digital pocket meter for easy measurement of the pH of water and other liquids. It shows pH to one decimal place and the sample temperature at the same time. According to the description on the page it is also suitable for measuring urine pH. Price: €49.90, the set includes calibration solutions and an electrode storage solution.

According to the official ADWA manufacturer's instructions it measures in the range from −2.0 to 16.0 pH with an accuracy of ±0.1 pH at 25 °C, and temperature in the range from −5 to 60 °C.

AD-11 pH meter ADWA, pocket digital pH tester

AD-11 pH meter

How it works and how to calibrate it

Switch the meter on, dip the electrode into the sample, stir gently and wait until the hourglass symbol disappears. The main display shows the temperature-compensated pH and the second shows the sample temperature. Rinse the electrode between samples so that the samples do not mix.

Calibration is automatic and recognises the buffers. Calibrate once a week or whenever the measurements seem wrong. You can use the 4.01, 7.01 or 10.0 solutions, but always start with 7.01. Use a fresh solution for every recalibration.

AD-11 pH meter before calibration, weekly calibration of the meter

AD-11 pH meter calibration step by step

  1. Dip the electrode into the 7.01 solution and press ON/OFF. The meter shows a value.
AD-11 pH meter calibration, step 1: electrode in the 7.01 solution
  1. Press CAL. The display shows the value 7.01. When it stops flashing, the first part of the calibration is done. Then press Read: the meter shows 4.01, flashing.
AD-11 pH meter calibration, step 2: confirming 7.01 with the CAL key
  1. Rinse the electrode thoroughly with distilled water.
  2. Choose the second solution according to the expected pH: 10.0 for alkaline samples or 4.01 for acidic ones (4.01 is the usual choice, for example in soil analysis). Dip the electrode into it. The display shows the value of the solution and flashes.
AD-11 pH meter calibration, step 4: choosing the second solution 4.01 or 10.0
  1. When the value stops flashing, press Read again and the calibration is complete.

Advantages: AD-11 pH meter

  • Pocket size, easy to use
  • Range −2.0 to 16.0 pH, accuracy ±0.1 pH
  • Automatic temperature compensation and temperature display
  • Automatic calibration with buffer recognition
  • Replaceable AD11P electrode
  • Batteries last about 300 hours of use
  • Automatic switch-off after 8 minutes
  • The set includes calibration solutions and a storage solution
  • Price: €49.90

Use: AD-11 pH meter

Who is it for

Choose it for quick measurement of the pH of water, other liquids or urine. If you need accuracy to two decimal places, see the AD-12 pH meter, and for pH and ORP measurements the AD14 pH/ORP meter.


Maintenance: AD-11 pH meter

Storing and cleaning the electrode

Store the electrode in its protective cap with a few drops of storage solution, never in distilled water. Rinse it with drinking water after use, clean it once a month with an electrode cleaning solution and recalibrate. If the electrode dries out, soak it in the storage solution for at least one hour. The replacement electrode is the AD11P.


Technical specifications: AD-11 pH meter

  • pH range: −2.0 to 16.0
  • Resolution: 0.1 pH
  • Accuracy: ±0.1 pH at 25 °C
  • Temperature: −5.0 to 60.0 °C (resolution 0.1 °C, accuracy ±0.5 °C)
  • Calibration: automatic, 1 or 2 points, buffers 4.01/7.01/10.01 or 4.01/6.86/9.18
  • Temperature compensation: automatic
  • Electrode: AD11P, replaceable
  • Power supply: 4 × 1.5 V batteries, about 300 hours
  • Dimensions: 175.5 × 39 × 23 mm, weight 100 g
  • Automatic switch-off: after 8 minutes

If you are looking for an AD-11 pH meter for quick and inexpensive measurement of water pH, this is a pocket ADWA tester with automatic calibration. Also see all ADWA pH and ORP meters.

Što su kolačići?
Posjetom i korištenjem web mjesta pristajete na korištenje i snimanje kolačića.OK Saznajte više o kolačićima