Washable sediment filter 100 micron in 10″ size traps mud, sand and coarse sediment from water. You can wash the cartridge and reuse it.

10″ washable sediment filter: a coarse sieve for mud and sand
The washable sediment filter 100 micron is a 10″ washable sediment filter with a rating of 100 microns. It is designed for coarse filtration: it traps sediment, mud and sand that water brings from a well, a private water supply or older pipes. Because it is washable, you wash it when it clogs and use it again.
Suitable as the first filtration stage, ahead of fine sediment and carbon cartridges.
Where to install it and what to combine it with
Install the washable sediment filter 100 micron at the inlet of the filtration system. It traps the coarse particles, so fine cartridges after it, for example the 5 micron sediment cartridge or the 1 micron one, work longer.
If the water contains less sand, the 50 micron washable filter makes more sense, and with very dirty water the 150 micron washable filter. For protection against limescale, also see the Aquafilter softening filter with polyphosphates.
Which rating to choose
Comparison: 100 micron traps coarser particles than 50 micron, but fewer fine ones than a 5 micron sediment cartridge. The washable cartridge does not remove chlorine, hardness or bacteria, so add a carbon cartridge and other stages as needed.
How to wash it
Shut off the water supply, take the cartridge out of the housing, rinse it under running water and put it back. The manufacturer does not state an exact washing interval or service life on the page, so please confirm them with us. If the flow does not recover after washing, replace the cartridge.
If you are looking for a washable sediment filter 100 micron for mud, sand and coarse sediment, this is a cheap washable cartridge for the first filtration stage in a 10″ housing. Also see our other individual cartridges for water filters.