FCCBL-G carbon cartridge

FCCBL-G carbon cartridge
FCCBL-G carbon cartridge
FCCBL-G carbon cartridge
FCCBL-G carbon cartridge

FCCBL-G carbon cartridge (Aquafilter, 10″ × 2.5″) removes chlorine and organic substances and improves water taste and odour. Replace every 3 to 6 months.

Zaliha
Na zalogi
Stopa poreza
22 %
Proizvodi u akciji
14,90 €
Dodaj u košaricu

 

FCCBL-G carbon cartridge

Aquafilter carbon block for chlorine, taste and odour in drinking water

The FCCBL-G carbon cartridge is a standard carbon block for drinking water treatment, designed for 10″ under-sink water filters. It is made of bituminous activated carbon, which removes chlorine and organic substances and improves the taste and odour of water. The manufacturer Aquafilter makes it in the European Union and, by its own statements, it meets NSF standards.

The block has a fine structure, so it also retains particles well while causing a small pressure drop. The cartridge fits a standard 10″ × 2.5″ housing and you can easily replace it yourself.

FCCBL-G carbon cartridge, Aquafilter 10″ × 2.5″

FCCBL-G carbon cartridge

How does it work and where to install it?

Water flows through the porous carbon block. Chlorine and organic substances (VOCs) bind to the surface of the carbon (adsorption), while particles are caught in the pores of the block. That is why it makes sense to put a sediment cartridge in front of it, which takes most of the particles and so extends the life of the block.

The most common combination is a sediment cartridge, a carbon cartridge and a fine sediment cartridge. The cartridge does not remove dissolved salts and is not intended for disinfecting water. According to the manufacturer, do not use water that is microbiologically unsuitable or of unknown quality without suitable disinfection before or after the system.


Advantages: FCCBL-G carbon cartridge

  • Removes chlorine and organic substances (VOCs)
  • Improves the taste and odour of water
  • Bituminous activated carbon free of iron and heavy metals
  • Small pressure drop at normal flow
  • Made in the EU, from food-contact materials
  • Standard size 10″ × 2.5″
  • Affordable price: €14.90

Use: FCCBL-G carbon cartridge

When to choose it and what to combine it with

Choose the FCCBL-G carbon cartridge if you want to remove chlorine from drinking water and improve its taste. For protection against sand and rust, install a 5 micron sediment cartridge in front of it, and for fine filtration after it a 1 micron sediment cartridge.

For reverse osmosis systems, the PurePro CTO Carbon Block 5 micron is also available. If you need additional protection against heavy metals and iron, see the GAC KDF cartridge. You will find other cartridges in the category individual cartridges for water filters.


Replacement: FCCBL-G carbon cartridge

When to replace the cartridge

The manufacturer states a service life of 3 to 6 months, depending on how contaminated the water is. At 2 ppm of free chlorine the estimated capacity is about 15,900 litres. When you notice a worse taste or odour or a drop in flow, replace the cartridge. Shut off the water supply before replacing it. Flush the new cartridge until the water runs clear.


Technical specifications: FCCBL-G carbon cartridge

  • Manufacturer: Aquafilter (made in the EU)
  • Media: bituminous activated carbon
  • Size: 10″ × 2.5″ (250 × 69 mm)
  • Nominal filtration: 5 to 10 µm
  • Operating temperature: 2 to 80 °C
  • Operating pressure: up to 6 bar
  • End caps: polypropylene, seal: silicone
  • Removes: chlorine, organic substances (VOCs)
  • Service life: 3 to 6 months

If you are looking for an FCCBL-G carbon cartridge to remove chlorine and improve the taste of water, the Aquafilter 10″ × 2.5″ carbon block is a proven and affordable choice. Also see our other water filters and reverse osmosis water filters.

Što su kolačići?
Posjetom i korištenjem web mjesta pristajete na korištenje i snimanje kolačića.OK Saznajte više o kolačićima